+61 7 5563 1222


Roger Hill 14m Power Catamaran

Currently under construction at Noosa Marine, Queensland, the custom designed
14m is a combination of DuFLEX Composite Panels....

LOA 14.10 m
LWL 12.11 m
Beam 5.17 m
Beam WL 1.50 m
Draft (Hull) 0.600 m (approx. fully loaded)
Displacement 15,000 kgs (approx. fully loaded)
Water 640 L
Fuel 2,560 L
Engines 2 x 480 HP (Yanmar 6LY3-ETP)
Genset 8 Kva
Roger Hill Yacht Design www.powercatsnz.com
Noosa Marine www.noosamarine.com.au

The custom designed 14m is a combination of DuFLEX Composite Panels cored with DIAB’s Divinycell H80 and HM100 structural foam cores, with some panels laminated with unidirectional laminates so they could be strip-planked to conform to the more compound sections of the outer topsides and wingdeck areas.  Divinycell HM100 was used in the hull bottom and lower topsides to provide extra toughness to absorb high dynamic impacts and slamming loads.

Bulkheads, hull soles, cabin sides, side decks, etc  were all supplied as CNC routed Component packs and are being installed at this time.

Noosa Marine used Techniglue R60 cartridges, in conjunction with the proprietary DuFLEX Z-Press ,to speed up the panel joining process, and WEST SYSTEM and KINETIX R246TX/ H160  epoxy systems are being used throughout the vessel  for bonding, taping and additional laminating of the strip planked sections .

ATL engineers worked with Roger to maximise performance, and keep weight to a minimum, to provide a very comfortable, stylish vessel for cruising on the North Queensland coastline.

More updates as the build progresses.

Click thumbnails to enlarge