Ease of application, rapid coat build-up, low porosity, increased gloss and quick cure, are some of the features of the DURATEC^® range to save time and labour, while ensuring a  superior finish. 

• PLUGS & PATTERNS

- Laminating Polystyrene Foam Plugs & Patterns
- Sealing, Fairing , Priming and Surfacing Plugs and Patterns
- Surfacing Clay Models and Patterns
- Surfacing Plaster Plugs

• IN-MOLD PRIMING

• MOLDS
- Composite Mold Repair
- Tooling Gelcoat Upgrade for Mold Surfaces
  Mold Surfacing
- Molds subject to High Heat Distortion & Chemical Corrosion
- Vacuum Forming Molds
  Mold Resurfacing
- Epoxy Contact Molds
- Molds subject to High Heat Distortion & Chemical Corrosion
- Plaster Molds
- Polyester and Vinyl Ester Contact Molds

• WOOD AND MDF SURFACES
- Sealing Wood Substrates
- Priming and Levelling Wood and MDF Surfaces
- Topcoating Wood and MDF Interior Surfaces

• MARINE COMPOSITES
- Gelcoat Repair
- Fairing
- Priming

• SPECIALTY PRODUCTS
- Bilge Coating
- Pot Life Extension
- Thinning Application

• STYROSAFE
- Expanded Polystyrene Lamination
- Priming Expanded Polystyrene Foam 

• ANCILLLARIES

- Duratec 500 Thinner contains a special blend of Methyl Ethyl Ketone that will reduce orange peel, dry over-spray and sub-surface porosity.  It also works well as a gun cleaning agent.

- ATS2.5  ANI 2.5mm Gravity Fed Spray Gun

- BH088110  ANI 3.5mm Set Up Kit

- SK01 ANI Spray Gun Service Kit

 

• In Mould Post Painted Parts.pdf
• Priming & Leveling Wood and MDF Surfaces.pdf
• Repairing Gelcoat.pdf
• Repairing, Fairing and Priming Marine Composites.pdf
• Resurfacing Contact, RTM and Vacuum Forming Molds.pdf
• Sealing, Fairing, and Surfacing Plugs, Patterns, Models and Finished Parts.pdf
• Surfacing Clay Models and Patterns.pdf
• Surfacing New Contact, RTM and Vacuum Forming Molds.pdf
• Surfacing Plaster Plugs and Molds.pdf
• Tooling Gelcoat Upgrade for Mold Surfaces.pdf
• Topcoating Wood and MDF Surfaces.pdf
• Aqua Buff Application Guide.pdf
• Manufacturing Direct Molds With Duratec.pdf